(Supporting ADX v03.1.00) Owner's manual

122 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Content switching
7
Creating response policies
A response policy associates request rules with one or more actions that specify how the Brocade
Virtual ADX handles outgoing traffic matching the rule. For more information on creating response
rules, refer to “Creating response rules” on page 114.
To create a Layer 7 response policy for outgoing traffic on the Brocade Virtual ADX, perform the
following steps within the Configure tab:
1. Click Traffic on the menu bar.
2. From the sidebar, select Content Switching, and then select Response Policies.
The Response Policies page is displayed, as shown in Figure 94.
3. Click New at the bottom of Response Policies page.
The Response Policy - new page is displayed, as shown in Figure 95.
FIGURE 95 Creating response policy