(Supporting ADX v03.1.00) Owner's manual
Table Of Contents
- Contents
- Preface
- Introduction to the Brocade Virtual ADX Web Interface
- Navigating the Web Interface
- Navigating the Dashboard
- Configuration Overview
- System Settings
- Network Settings
- Traffic Settings
- GSLB Settings
- Security Settings
- Monitoring Overview
- Viewing System Information
- Viewing Network Status
- Viewing Traffic Statistics
- Viewing Security Statistics
- Maintenance Overview
- Managing Software Images
- Restarting the System
- License Management
- Packet Capture
- Accessing the CLI
- Retrieving System Information for Technical Support
- Troubleshooting
- Config Template XML Schema
- Managing Config Templates through the CLI
Brocade Virtual ADX Graphical User Interface Guide 55
53-1003242-01
Chapter
6
Network Settings
In this chapter
•Configuring network interfaces and IP addresses . . . . . . . . . . . . . . . . . . . . 55
•Configuring static routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
•Configuring VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Configuring network interfaces and IP addresses
The Brocade Virtual ADX allows you to edit the interface configurations and add loopback
interfaces.
To display the interfaces on the Brocade Virtual ADX, perform the following steps within the
Configure tab.
1. Click Network on the menu bar.
2. From the sidebar, select Interface.
The Summary tab is displayed. See Figure 42.
FIGURE 42 Interface summary tab
The Summary tab displays a list of configured IP interfaces. Each entry in the list includes the
interface ID, interface name, type, Admin and runtime status, primary ID and MAC address.