Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 119
53-1003312-01
IP general group
snRtIpSetAllPortConfig
brcdIp.1.2.2.1.12
Syntax: Integer32
Read-write Shows the index number of a row in the “snRtIpPortConfigTable” on
page 125, such as “snRtIpPortConfigPortIndex” on page 125. All the
writeable data from that row will be copied to all appropriate rows in all
IP Interface Port Configuration Tables
NOTE: Prior to setting this object, make sure that the row identified in
this object contains a value for all its objects; otherwise, the
current data of the row will be used to set the entire IP interface
configuration table.
snRtIpFwdCacheMaxEn
tries
brcdIp.1.2.2.1.13
Syntax: Integer32
Read only Shows the maximum number of entries in the “IP forwarding cache
table”.
snRtIpFwdCacheCurEnt
ries
brcdIp.1.2.2.1.14
Syntax: Integer32
Read only Shows the current number of entries in the “IP forwarding cache table”.
snRtIpMaxStaticRouteE
ntries
brcdIp.1.2.2.1.15
Syntax: Integer
Read only Shows the maximum number of entries in the IP Static Route table.
snRtIpDirBcastFwd
brcdIp.1.2.2.1.16
Syntax: Integer
Read-write Indicates if the directed broadcast forwarding feature is enabled:
• disabled(0)
• enabled(1)
snRtIpLoadShareNumO
fPaths
brcdIp.1.2.2.1.17
Syntax: Integer32
Read-write Specifies the number of routes to be used to share the load.
snRtIpLoadShareMaxP
aths
brcdIp.1.2.2.1.18
Syntax: Integer32
Read only Indicates the maximum number of routes that can be configured to
share the loads.
snRtIpLoadShareMinPa
ths
brcdIp.1.2.2.1.19
Syntax: Integer32
Read only Indicates the minimum number of routes that can be configured to
share the loads.
snRtIpProtocolRouterId
brcdIp.1.2.2.1.20
Syntax: IpAddress
Read-write Shows the router ID for all IP Protocols.
snRtIpSourceRoute
brcdIp.1.2.2.1.21
Syntax: Integer
Read-write Indicates if strict source routing is enabled to drop source routed
packets:
• disabled(0)
• enabled(1)
Name, OID, and Syntax Access Description