Reference (Supporting ADX v03.1.00) Owner's manual

124 Brocade Virtual ADX MIB Reference
53-1003312-01
IP interface port access table
IP interface port access table
This table determines if the port is for incoming or outgoing traffic and the filter used on the
interface.
snRtIpPortAddrType
brcdIp.1.2.2.6.1.4
Syntax: Integer
Read-write Shows the port type of the entry:
• primary(1)
• secondary(2)
Default: primary(1)
snRtIpPortRowStatus
brcdIp.1.2.2.6.1.5
Syntax: Integer
Read-write Controls the management of the table rows. The values that can be
written are:
• delete(3) – Delete the row
• create(4) – Create a new row
• modify(5) – Modify an existing row
If the row exists, then a set with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row
• invalid(1) – Row is inoperative
• valid(2) – Row exists and is valid
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snRtIpPortAccessTable
brcdIp.1.2.2.7
None IP Port Access Table.
snRtIpPortAccessEntry
brcdIp.1.2.2.7.1
None An entry in the IP Port Access Table.
snRtIpPortAccessPortIndex
brcdIp.1.2.2.7.1.1
Syntax: PortIndex
Read only The index for an entry in the IP Port Access Table.
snRtIpPortAccessDirection
brcdIp.1.2.2.7.1.2
Syntax: Integer
Read only Specifies if the port is for incoming or outgoing traffic.
• in(1)
• out(2)
snRtIpPortAccessFilters
brcdIp.1.2.2.7.1.3
Syntax: OctetString
Read-write Each octet represents a filter number.
snRtIpPortAccessRowStatus
brcdIp.1.2.2.7.1.4
Syntax: Integer
Read-write Controls the management of the table rows. The values that can be
written are:
• delete(3) – Delete the row
• create(4) – Create a new row
• modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row
• invalid(1) – Row is inoperative
• valid(2) – Row exists and is valid