Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 125
53-1003312-01
Port configuration tables
Port configuration tables
The following table defines the size, encapsulation format, and cost of the packet that will be
transmitted through a port.
IP interface port configuration table
The following table is used by all devices.
Name, OID, and Syntax Access Description
snRtIpPortConfigTable
brcdIp.1.2.2.8
None IP Port Configuration Table.
snRtIpPortConfigEntry
brcdIp.1.2.2.8.1
None An entry in the IP Port Configuration Table.
snRtIpPortConfigPortIndex
brcdIp.1.2.2.8.1.1
Syntax: PortIndex
Read only An index for an entry in the IP Port Configuration Table.
snRtIpPortMtu
brcdIp.1.2.2.8.1.2
Syntax: Integer
Read-write Indicates the maximum size of IP packets that will be transmitted
on the port.
snRtIpPortEncap
brcdIp.1.2.2.8.1.3
Syntax: Integer
Read-write Shows the encapsulation format that will be used on the IP frame
transmitted on the port.
• ethernet(1) – Ethernet
• snap(2) – ATM and Ethernet
• hdlc(3) – POS
• ppp(4) – POS
snRtIpPortMetric
brcdIp.1.2.2.8.1.4
Syntax: Integer
Read-write Specifies the metric or cost to the router adds to the route.
Valid values: 1 – 15
Default: 1
snRtIpPortDirBcastFwd
brcdIp.1.2.2.8.1.5
Syntax: Integer
Read-write Indicates if the directed broadcast forwarding feature is enabled. A
directed broadcast is a packet containing all ones (or in some
cases, all zeros) in the host portion of the destination IP address.
When a router forwards such a broadcast, it sends a copy of the
packet out each of its enabled IP interfaces:
• disabled(0)
• enabled(1)
Default: enabled(1)