Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 133
53-1003312-01
IP AS-Path access list table
IP AS-Path access list table
The IP AS-Path Access List Table (snIpAsPathAccessListTable) has been deprecated and is no
longer supported on devices.
IP AS-Path access list string table
AS-PATH is a list of the other ASs through which a route passes. BGP4 routers can use the AS-path
to detect and eliminate routing loops. The IP AS-Path Access List Table contains filters that are used
to deny or permit updates received from BGP4 neighbors.
Name, OID, and Syntax Access Description
snIpAsPathAccessListStringT
able
brcdIp.1.2.2.16
None IP As-Path Access List Table.
snIpAsPathAccessListStringE
ntry
brcdIp.1.2.2.16.1
None An entry in the IP As-Path Access List Table.
snIpAsPathAccessListString
Name
brcdIp.1.2.2.16.1.1
Syntax: DisplayString
Read only An index for the entry in the table.
snIpAsPathAccessListStringS
equence
brcdIp.1.2.2.16.1.2
Syntax: Integer32
Read only The sequence index for this entry in this table.
snIpAsPathAccessListStringA
ction
brcdIp.1.2.2.16.1.3
Syntax: Integer
Read-write Determines what to do with the packet if its address matches this
entry:
• deny(0)
• permit(1)
snIpAsPathAccessListStringR
egExpression
brcdIp.1.2.2.16.1.4
Syntax: Integer
Read-write Specifies the AS path information that will be permitted or denied.
This object contains a regular expression. Each character of the
regular expression string is represented by one octet.
snIpAsPathAccessListStringR
owStatus
brcdIp.1.2.2.16.1.5
Syntax: Integer
Read-write Controls the management of the table rows. The values that can be
written are
• delete(3) – Delete the row
• create(4) – Create a new row
• modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are deleted immediately. The following
values can be returned on reads:
• noSuch(0) – No such row
• invalid(1) – Row is inoperative
• valid(2) – Row exists and is valid