Manualshelf

Reference (Supporting ADX v03.1.00) Owner's manual

ManualsBrandsBrocade ManualsComputer AccessoriesVirtual ADX MIB
141142143144145146147148149150
Brocade Virtual ADX MIB Reference 135
53-1003312-01
Chapter
11
OSPF
In this chapter
•OSPF general objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
•OSPF area table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
•Area range table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
•OSPF interface configuration tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
•OSPF virtual interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
•OSPF redistribution of routes table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
•OSPF neighbor table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
•OSPF virtual neighbor table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
•OSPF link-state database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
•OSPF link state database, external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
•OSPF area status table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
•OSPF interface status table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
•OSPF virtual interface status table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
•OSPF routing information table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
•The Open Shortest Path First (OSPF) protocol fully complies with RFC 1850 - OSPF Version 2
Management Information Base. 162
The tables in this chapter are not supported on the Virtual ADX products.
OSPF general objects
This chapter presents the objects for the Open Shortest Path First (OSPF) protocol. For objects
relating to OSPF traps, refer to the chapter “Traps and Objects to Enable Traps” on page 247.
Refer to the configuration guide for a product for details on the features discussed in this chapter.
The OSPF General objects provide information about the OSPF Process. They apply globally to the
routers.