Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 187
53-1003312-01
Layer 4 policies
Layer 4 policy port access table
The Layer 4 Policy Port Access table lists all access policy entries. These access policies are
applied to IP interfaces (ports) that have Layer 4 IP policies configured on them. IP policies are
described in the “snL4PolicyTable”.
Name, OID, and Syntax Access Description
snL4PolicyTable
brcdIp.1.1.4.11.1
None The Layer 4 Policy Table.
snL4PolicyEntry
brcdIp.1.1.4.11.1.1
None An entry in the Layer 4 Policy Table.
snL4PolicyId
brcdIp.1.1.4.11.1.1.1
Syntax: Integer
Read only Specifies the ID of the policy.
Valid values: 1 – 64
snL4PolicyPriority
brcdIp.1.1.4.11.1.1.2
Syntax: Integer
Read-write Shows the priority of the policy in the ServerIron:
Standalone stackable ServerIrons have the following priorities:
• normal(0) – normal priority
• high(1) – high priority
• cache(2) – priority for cache
• transparent(3) – priority for transparent
Non-stackable ServerIron Layer 4 priority values are:
• level0(0)
• level1(1)
• level2(2)
• level3(3)
• level4(4)
• level5(5)
• level6(6)
• level7(7)
snL4PolicyScope
brcdIp.1.1.4.11.1.1.3
Syntax: Integer
Read-write Indicates if the policy applies to one or all ports:
• global(0) – Applies to all ports.
• local(1) – Applies to one port.
snL4PolicyProtocol
brcdIp.1.1.4.11.1.1.4
Syntax: Integer
Read-write Indicates if the policy is for a UDP or TCP protocol:
• udp(0)
• tcp(1)
snL4PolicyPort
brcdIp.1.1.4.11.1.1.5
Syntax: Integer
Read-write Indicates the TCP or UDP port number to which this policy will be
applied.
Valid values: 0 – 65535
snL4PolicyRowStatus
brcdIp.1.1.4.11.1.1.6
Syntax: Integer
Read-write Controls the management of the table rows. The values that can be
written are:
• delete(3) – Delete the row
• create(4) – Create a new row
• modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row
• invalid(1) – Row is inoperative
• valid(2) – Row exists and is valid