Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 17
53-1003312-01
Software Image
snAgImgLoad
brcdIp.1.1.2.1.7
Syntax: Integer
Read-write Downloads or uploads a new software image to the agent. Use one of
the following values in an SNMP set:
• uploadMPPrimary(19) – Uploads the primary image from the
management processor flash memory to the TFTP server.
• downloadMPPrimary(20) – Downloads the primary image from
the TFTP server to management processor flash.
• uploadMPSecondary(21) – Uploads the secondary image from
the management processor flash memory to the TFTP server.
• downloadMPSecondary(22) – Downloads the secondary image
from the TFTP server to management processor flash.
• downloadSPPrimary(24) – Downloads the secondary image from
the TFTP server to secondary processor flash.
• downloadSPSecondary(25) – Downloads the secondary image
from the TFTP server to secondary processor flash.
The following messages may be displayed:
• normal(1)
• flashPrepareReadFailure(2)
• flashReadError(3)
• flashPrepareWriteFailure(4)
• flashWriteError(5)
• tftpTimeoutError(6)
• tftpOutOfBufferSpace(7)
• tftpBusy(8)
• tftpRemoteOtherErrors(9)
• tftpRemoteNoFile(10)
• tftpRemoteBadAccess(11)
• tftpRemoteDiskFull(12)
• tftpRemoteBadOperation(13)
• tftpRemoteBadId(14)
• tftpRemoteFileExists(15)
• tftpRemoteNoUser(16)
• operationError(17)
• loading(18) – operation is in process
• uploadMPPrimary(19)
• downloadMPPrimary(20)
• uploadMPSecondary(21)
• downloadMPSecondary(22)
• tftpWrongFileType(23)
• downloadSPPrimary(24)
• downloadSPSecondary(25)
This object requires a password to be set for the snAgGblPassword
object.
snAgCfgFname
brcdIp.1.1.2.1.8
Syntax: DisplayString
Read-write Shows the name of the configuration file, including its path, currently
associated with the system. If there are multiple configuration files,
the names are separated by semicolons (;). This object can have up to
32 characters.
Name, OID, and Syntax Access Description