Reference (Supporting ADX v03.1.00) Owner's manual

18 Brocade Virtual ADX MIB Reference
53-1003312-01
Software Image
snAgCfgLoad
brcdIp.1.1.2.1.9
Syntax: Integer
Read-write Downloads or uploads a configuration file to the agent. Use one of the
following values for SNMP set:
• uploadFromFlashToServer(20) – Uploads the configuration file
from the flash to the TFTP server.
• downloadToFlashFromServer(21) – Downloads the configuration
file from the TFTP server to flash.
• uploadFromDramToServer(22) – Uploads the configuration file
from the DRAM to the TFTP server.
• downloadToDramFromServer(23) – Downloads the configuration
file from the TFTP server to DRAM.
• uploadFromFlashToNMS(24) – Uploads the configuration file from
flash to the network management system.
• downloadToFlashFromNMS(25) – Downloads the configuration
file from the network management system to flash.
• uploadFromDramToNMS(26) – Uploads the configuration file
from DRAM to a network management system.
• downloadToDramFromNMS(27) – Downloads the configuration
file from the network management system to DRAM.
The following values may be read:
• normal(1)
• flashPrepareReadFailure(2)
• flashReadError(3)
• flashPrepareWriteFailure(4)
• flashWriteError(5)
• tftpTimeoutError(6)
• tftpOutOfBufferSpace(7)
• tftpBusy(8)
• tftpRemoteOtherErrors(9)
• tftpRemoteNoFile(10)
• tftpRemoteBadAccess(11)
• tftpRemoteDiskFull(12)
• tftpRemoteBadOperation(13)
• tftpRemoteBadId(14)
• tftpRemoteFileExists(15)
• tftpRemoteNoUser(16)
• operationError(17)
• loading(18)
• tftpWrongFileType(29)
• operationDoneWithNMS(28)
• tftpWrongFileType(29)
• downloadToDramFromServerOverwrite(30)
NOTE: The objects “snAgCfgFname” and “snAgTftpServerIp” are
required to allow the download or upload process to occur.
No write requests is allowed while a download or upload
process is in progress.
The snAgCfgEosTable objects must be sent along in one PDU
for network management systems to recognize values from
(24) to (27).
A separate write memory using the CLI or an SNMP “set
snAgWriteNVRAM” is required to save the configuration to
NVRAM.
This object requires a password to be set for the
snAgGblPassword object.
Name, OID, and Syntax Access Description