Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 27
53-1003312-01
Software configuration
Switch configuration summary group
The following object applies to all devices.
Banners
Banners are messages that are displayed when a user logs into the device.
snSwQosMechanism
brcdIp.1.1.3.1.40
Syntax: Integer
Read-write Specifies the quality of service (QoS) mechanism:
• strict(0)
• weighted(1)
Default: weighted(1)
snSwSingleStpMode
brcdIp.1.1.3.1.41
Syntax: Integer
Read-write Specifies if the Single Spanning Tree System Mode in the Switch Group
is enabled.
• disabled(0)
• enabled(1)
Default: disabled(0)
snSwFastStpMode
brcdIp.1.1.3.1.42
Syntax: Integer
Read-write Indicates if Fast Spanning Tree System Mode in the Switch Group is
enabled.
• disabled(0)
• enabled(1)
snSwViolatorIfIndex
brcdIp.1.1.3.1.43
Syntax: Integer32
Read only The port number of the device that received a violator packet. This
number is included in the locked address violator trap.
snSwSingleStpVLanId
brcdIp.1.1.3.1.43
Syntax: INTEGER
Read only The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree
was enabled. This object returns zero if Single Spanning Tree was
disabled.
Name, OID, and Syntax Access Description
snSwSummaryMode
brcdIp.1.1.3.7.1
Syntax: Integer
Read-write Indicates whether or not the Switch Configuration Summary is enabled.
• disabled(0)
• enabled(1)
Default: disabled(0)
Name, OID, and Syntax Access Description
snAgGblBannerExec
brcdIp.1.1.2.1.61
Syntax: DisplayString
Read-write Enter a message that will be displayed when a user enters the
Privileged EXEC CLI level of a device.
Enter up to 2047 characters for this banner. Use the character "\n"
within the string to start a new line.
Leave this object blank if no message is to be displayed.