Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 51
53-1003312-01
Chapter
6
Interfaces
In this chapter
•Switch port information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
•Interface ID lookup table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
•Interface index lookup table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
•Trunk port configuration group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
•Multi-slot trunk port table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
•Multi-slot trunk port table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
•Link Aggregation Group (LAG) table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
•Packet port information table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
•Loopback interface configuration table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
•Port STP configuration groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
•Port monitor table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Switch port information
This chapter presents the objects used to define interfaces on a device. Refer to the configuration
guide for a product for details on the features discussed in this chapter.
The following table contains information about the switch port groups.
Switch port information group
The snSwIfInfoTable contains information about the switch port groups.
Name, OID, and Syntax Access Description
snSwIfInfoTable
brcdIp.1.1.3.3.5
None The Switch Port Information Table.
snSwIfInfoEntry
brcdIp.1.1.3.3.5.1
None An entry in the snSwIfInfo table indicates the configuration for a
specified port. An SNMP SET PDU for a row of the
snSwPortInfoTable requires the entire sequence of the MIB
Objects in each snSwPortInfoEntry stored in one PDU. Otherwise,
GENERR return-value will be returned.
snSwIfInfoPortNum
brcdIp.1.1.3.3.5.1.1
Syntax: InterfaceIndex
Read only Shows the port or interface index.