Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 59

53-1003312-01

Interface ID lookup table

The Interface ID Lookup Table maps interface ID to the InterfaceIndex (ifIndex) Lookup Table. Given

an interface ID, this table returns the ifIndex value. The table is useful for mapping a known

interface to the corresponding ifIndex value.

NOTE

The contents of the table can only be accessed using Get operations. Unlike other SNMP tables, this

table does not support GetNext operations. If you try to walk the table using GetNext, no rows will be

returned.

snSwIfStatsOutKiloBitsPerSec

brcdIp.1.1.3.3.5.1.55

Syntax: Unsigned32

Read-only Shows the bit rate, in kilobits per second, transmitted from a 10

Gigabit or faster interface within a five minute interval.

snSwlfStatsInJumboFrames

brcdIp.1.1.3.3.5.1.56

Syntax: Counter64

Read only The total number of jumbo packets received on the interface.

snSwlfStatsOutJumboFrames

brcdIp.1.1.3.3.5.1.57

Syntax: Counter64

Read only The total number of jumbo packets transmitted out of the

interface.

snSwlfSInfoMirrorMode

brcdIp.1.1.3.3.5.1.58

Syntax: INTEGER

Read only Provides the mirror mode status as described:

• disable (0)

• enable (1)

snSwlfMacLearningDisable

brcdIp.1.1.3.3.5.1.59

Syntax: Syntax: TruthVal

Read-write DIsplays the status of MAC Learning on an ethernet port.

For POS ports, Get operation will return the default value and Set

operation will return an error.

Name, OID, and Syntax Access Description

snInterfaceLookupTable

brcdIp.1.1.3.3.3

None The Interface Lookup Table

snInterfaceLookupEntry

brcdIp.1.1.3.3.3.1

None An entry in the Interface Lookup Table.

NOTE: This table is used only by IronView Network Manager. You

will receive an error if you try to implement a get-next.