Reference (Supporting ADX v03.1.00) Owner's manual

62 Brocade Virtual ADX MIB Reference
53-1003312-01
Multi-slot trunk port table
Multi-slot trunk port table
The following table applies to multi-slot trunk ports. They show the ports that are members of a
trunk group. They apply to all devices unless otherwise specified in their descriptions.
snTrunkPortMask
brcdIp.1.1.3.6.1.1.2
Syntax: PortMask
Read-write Shows the trunk port membership of the switch.
snTrunkType
brcdIp.1.1.3.6.1.1.3
Syntax: Integer
Read-write Indicates if the trunk port is connected to a switch or a server:
• switch(1)
• server(2).
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snMSTrunkTable
brcdIp.1.1.3.6.2
None The Multi-slot Trunk Port Configuration Table.
snMSTrunkEntry
brcdIp.1.1.3.6.2.1
None An entry of the Multi-slot Trunk Port Configuration Table.
snMSTrunkPortIndex
brcdIp.1.1.3.6.2.1.1
Syntax: Integer32
Read only Identifies the port that is the primary port of a trunk group.
For module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.
snMSTrunkPortList
brcdIp.1.1.3.6.2.1.2
Syntax: OctetString
Read-write Contains a list of port indices that are members of a trunk group.
Each port index is a 16-bit integer in big endian order. The first port
index must be the index of the primary port.
snMSTrunkType
brcdIp.1.1.3.6.2.1.3
Syntax: Integer
Read-write Specifies if the ports are connected to a switch or a server:
• switch(1)
• server(2)
snMSTrunkRowStatus
brcdIp.1.1.3.6.2.1.4
Syntax: Integer
Read-write Applies to all devices, except for ServerIron products.
Creates, deletes, or modifies an entry in this table:
• invalid(1)
• valid(2)
• delete(3)
• create(4)
• modify(5)