Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 63
53-1003312-01
Multi-slot trunk port table
Multi-slot trunk port table
The snMSTrunkTable has been made obsolete and replaced with the snMSTrunkIfTable as
described in the following.
Link Aggregation Group (LAG) table
snLinkAggregationGroupTable
The snMSTrunkIfTable has replaced with the snLinkAggregationGroupTable as described in the
following table. However, the snLinkAggregationGroupTable has been made obsolete and has been
replaced by the fdryLinkAggregationGroupTable.
Name, OID, and Syntax Access Description
snMSTrunkIfTable
brcdIp.1.1.3.6.3
None The Multi-slot Trunk Interface Configuration Table.
snMSTrunkIfEntry
brcdIp.1.1.3.6.3.1
None An entry of the Multi-slot Trunk Interface Configuration Table.
snMSTrunkIfIndex
brcdIp.1.1.3.6.3.1.1
Syntax: Integer
Read only Identifies the port that is the primary port of a trunk group.
For module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.
snMSTrunkIfList
brcdIp.1.1.3.6.3.1.2
Syntax: OctetString
Read-write Contains a list of port indices that are members of a trunk group.
Each port index is a 32-bit integer in big endian order. The first
interface/port index must be the index of the primary port.
snMSTrunkIfType
brcdIp.1.1.3.6.3.1.3
Syntax: Integer
Read-write Specifies if the ports are connected to a switch or a server:
• switch(1)
• server(2)
snMSTrunkIfRowStatus
brcdIp.1.1.3.6.3.1.4
Syntax: Integer
Read-write Creates, deletes, or modifies an entry in this table:
• invalid(1)
• valid(2)
• delete(3)
• create(4)
• modify(5)
Name, OID, and Syntax Access Description
snLinkAggregationGroupTable
brcdIp.1.1.3.30.1.1
None The snLinkAggregation table.
snLinkAggregationGroupEntry
brcdIp.1.1.3.30.1.1.1
None An entry of the Link Aggregation table,
snLinkAggregationGroupName
brcdIp.1.1.3.30.1.1.1.1
Syntax: DisplayString
(Size(1..255))
None Displays the name of a LinkAggregationGroup.