Reference (Supporting ADX v03.1.00) Owner's manual

78 Brocade Virtual ADX MIB Reference
53-1003312-01
Port monitor table
Port monitor table
The Port Monitor Table shows the status of port monitoring on an interface.
MRP
The following table contains information about Metro Ring Protocol (MRP) MIB objects.
Name, OID, and Syntax Access Description
snPortMonitorTable
brcdIp.1.1.3.25.1.
N/A The Port Monitor Table
snPortMonitorEntry
brcdIp.1.1.3.25.1.1.
N/A An entry in the Port Monitor Table
snPortMonitorIfIndex
brcdIp.1.1.3.25.1.1.1
N/A ID of the port in the table
snPortMonitorMirrorList
brcdIp.1.1.3.25.1.1.2
Syntax: DisplayString
Read-write Lists the monitoring status of each port.
The values in this object are space delimited. They consist of a
sequence of a port’s ifIndex followed by the port’s monitoring mode.
Port monitoring mode can be one of the following:
• 0 – Monitoring is off
• 1 – The port will monitor input traffic
• 2 – The port will monitor output traffic
• 3 – The port will monitor both input and output traffic
For example, you may see the following values:
65 2 66 1
“65” may represent port 2/1 and “66” port 2/2.
The entry means that port 2/1 is monitoring output traffic. Port 2/2
will monitor input traffic.
Name, OID, and Syntax Access Description
snMetroRingTable
brcdIp.1.1.3.29.2.1
Syntax: SEQUENCE of
SnMetroRingEntry
None The Metro Ring Table.
snMetroRingEntry
brcdIp.1.1.3.29.2.1.1
Syntax: SnMetroRingEntry
None An entry in the Metro Ring Table.
snMetroRingVlanId
brcdIp.1.1.3.29.2.1.1.1
Syntax: Integer32
None Identifies a VLAN that controls the Metro Ring.
snMetroRingId
brcdIp.1.1.3.29.2.1.1.2
Syntax: Integer32
None The Metro Ring identifier.
snMetroRingConfigState
brcdIp.1.1.3.29.2.1.1.3
Syntax: Integer
Read write The state of the Metro Ring.