Reference (Supporting ADX v03.1.00) Owner's manual

Brocade Virtual ADX MIB Reference 85
53-1003312-01
ACLs
snAgAclEstablished
brcdIp.1.2.2.15.2.1.18
Syntax: Integer
Read-write Applies only to extended ACLs.
Enables or disables the filtering of established TCP packets that have the
ACK or RESET flag turned on. This additional filter only applies to TCP
transport protocol.
• disabled(0)
• enabled(1)
snAgAclLogOption
brcdIp.1.2.2.15.2.1.19
Syntax: TruthVal
Read-write Determines if ACL matches are logged:
• false(0) – Do not log ACL matches
• true(1) – Log ACL matches
snAgAclStandardFlag
brcdIp.1.2.2.15.2.1.20
Syntax: TruthVal
Read-write Indicates if this is a standard ACL:
• false(0) – The ACL is an extended ACL
• true(1) – The ACL is a standard ACL
snAgAclRowStatus
brcdIp.1.2.2.15.2.1.21
Syntax: SnRowStatus
Read-write Creates or deletes an ACL entry.
• other(1)
• valid(2)
• delete(3)
• create(4)
snAgAclFlowCounter
brcdIp.1.2.2.15.2.1.22
Syntax: Counter64
Read only Shows an approximate count of flows that match the individual ACL
entry.
snAgAclPacketCounter
brcdIp.1.2.2.15.2.1.23
Syntax: Counter64
Read only Shows the number of packets that matched the ACL entry.
snAgAclComments
brcdIp.1.2.2.15.2.1.24
Syntax: DisplayString
Read-write Indicates the description of an individual ACL entry.
snAgAclIpPriority
brcdIp.1.2.2.15.2.1.25
Syntax: Integer
Read-write Indicates the QoS priority option for this ACL. This priority assigns traffic
that matches the ACL to a hardware forwarding queue. In addition to
changing the internal forwarding priority, if the outgoing interface is an
802.1Q interface, this option maps the specified priority to its equivalent
802.1p (CoS) priority and marks the packet with the new 802.1p priority.
snAgAclPriorityForce
brcdIp.1.2.2.15.2.1.26
Syntax: Integer
Read-write Indicates priority that is being forced on the outgoing packet. This
parameter allows you assign packets of outgoing traffic that match the
ACL to a specific hardware forwarding queue, even though the incoming
packet may be assigned to another queue.
Valid values:
• qosp0(0)
• qosp1(1)
• qosp2(2)
• qosp3(3)
• Not defined(4)
Default: Not defined(4).
snAgAclPriorityMapping
brcdIp.1.2.2.15.2.1.27
Syntax: Integer
Read-write Indicates the priority of the incoming packet to be matched. This option
maps the packet’s 802.1p value. It does not change the packet’s
forwarding priority through the device nor does it mark the packet.
Valid values: 0 – 8
Default: Not defined(8)
Name, OID, and Syntax Access Description