Reference (Supporting ADX v03.1.00) Owner's manual

86 Brocade Virtual ADX MIB Reference
53-1003312-01
ACLs
snAgAclDscpMarking
brcdIp.1.2.2.15.2.1.28
Syntax: Integer
Read-write Indicates the DSCP marking of a packet that will be matched.
Valid values: 0 – 64
Default: Not defined(64)
snAgAclDscpMapping
brcdIp.1.2.2.15.2.1.29
Syntax: Integer
Read-write Indicates the DCSP value of the incoming packet value to be matched.
Valid values: 0 – 64
Default: Not defined(64)
snAgAclIcmpCode
brcdIp.1.2.2.15.2.1.30
Syntax: Integer
Read write If you entered a value for ICMP message type number in the
“snAgAclSourceOperand2” object, enter the code number in this object.
Valid value for type code 1, Echo reply
• 1 = Echo reply
Valid values for type code4, Destination unreachable
• 1 = Network unreachable
• 2 = Host unreachable
• 3 = Protocol unreachable
• 4 = Port unreachable
• 5 = Fragmentation needed by don't fragment bit set
• 6 = Source route failed
• 7 = Destination network unknown
• 8 = Destination host unknown
• 9 = Source host isolated
• 10 = Destination network administratively prohibited
• 11 = Destination host administratively prohibited
• 12 = Network unreachable for TOS
• 13 = Host unreachable for TOS
• 14 = Communication administratively prohibited by filter
• 15 = Host precedence violation
• 16 = Precedence cutoff in effect
VValid values for type code 5, Source quench
• 1 = Source quench
alid values for type code 6, Redirect
• 1 = Redirect for network
• 2 = Redirect for host
• 3 = Redirect for TOS and network
• 4 = Redirect for TOS and host
Valid value for type code 9, Echo request
• 1 = Echo request
Valid value for type code 10, Router advertisement
• 1 = Router advertisement
Valid value for type code 11, Router solicitation
• 1 = Router solicitation
Valid values for type code 12, Time exceeded
• 1 = Time to live equals 0 during transmit
• 2 = Time to live equals 0 during reassembly
Valid values for type code 13, Parameter problem
• 1 = IP header bad (catchall error)
• 2 = Required option missing
Name, OID, and Syntax Access Description