(Supporting ADX v03.1.00) Owner manual

338 Brocade Virtual ADX Server Load Balancing Guide

53-1003247-01

Configuring SIP SLB

SIP SLB over UDP (stateful SLB mode)

SIP SLB over UDP makes SIP stateful and adds the intelligence needed to handle different Caller-ID

situations.

SIP stateful basic configuration

1. Configure a real server.

Virtual ADX(config)#server real rs 10.2.2.2

Virtual ADX(config)#port sip sip-proxy-server

Virtual ADX(config)#port sip sip-both-registrar-proxy-server

health-check-method register

2. Configure a virtual server.

Virtual ADX(config)#server virtual-name-or-ip sip_vip 10.1.1.1

Virtual ADX(config)#port sip sip-stateful sip-keyfield-call-id

Syntax: [no] port sip sip-stateful [sip-keyfield-call-id | sip-keyfield-via]

3. Configure a SIP stateful port.

Virtual ADX(config)#port sip sip-stateful

Syntax: [no] port sip sip-stateful

4. Bind a virtual server to a real server.

Virtual ADX(config)#bind sip rs sip