(Supporting ADX v03.1.00) Owner manual

374 Brocade Virtual ADX Server Load Balancing Guide
53-1003247-01
Displaying real server information and statistics
B
TABLE 42 Real server detail information
Field Description
Port The TCP/UDP port name or number. This field can have one of the
following values:
• default
• dns – The well-known name for port 53
• ftp – The well-known name for port 21. (Ports 20 and 21 both are
FTP ports but on the Brocade Virtual ADX, the name “ftp”
corresponds to port 21.)
• http – The well-known name for port 80
• imap4 – The well-known name for port 143
• ldap – The well-known name for port 389
• nntp – The well-known name for port 119
• ntp – The well-known name for port 123
• pop2 – The well-known name for port 109
• pop3 – The well-known name for port 110
• radius – The well-known name for udp port 1812
• smtp – The well-known name for port 25
• snmp – The well-known name for port 161
• ssl – The well-known name for port 443
• telnet – The well-known name for port 23
• tftp – The well-known name for port 69
• number – The port number, if the port is not one of those listed
above
St The state of the port. The state can be one of the following:
• enabled
• failed
• test
• suspect
• graceful shutdown
• active
• unbnd
NOTE: If the state is unbnd, you have not bound the port to a virtual
server port.