(Supporting ADX v03.1.00) Owner manual

378 Brocade Virtual ADX Server Load Balancing Guide

53-1003247-01

Displaying virtual server information and statistics

ACL ID Displays the ID of the Access Control List (ACL) policy bound to the

virtual server

Predictor The load balancing predictor the Brocade Virtual ADX uses to balance traffic among the

real servers bound to this virtual server. The predictor can be one of the following:

• least-conn

• round-robin

• weighted-round-robin

• weighted

• enhanced-weighted

You can assign these metrics on a global basis and an individual virtual server basis.

For more information, refer to “Load-balancing predictor” on page 8.

To change the predictor (globally or locally), refer to “Changing the Load-Balancing

Predictor Method” on page 21.

Tot-Conn The number of client connections on the server since the Brocade Virtual ADX was last

booted or restarted. A connection consists of two sessions, the client-to-server session

and the server-to-client session.

VIP state Displays the health of the virtual server. The health status can be

one of the following:

• Healthy — Indicates the virtual server is healthy.

• Not healthy — Indicates the virtual server is not healthy.

Rx Pkts Displays the total number of packets received by the virtual server.

Rx bytes Displays the total number of bytes received by the virtual server.

Rx PPS Displays the total number of packets per second received by the virtual server.

Rx throughput The rate of throughput received in Kbps.

Tx Pkts Displays the total number of packets transmitted by the virtual server.

Tx bytes Displays the total number of bytes transmitted by the virtual server.

Tx PPS Displays the total number of packets per second transmitted by the virtual server.

Tx throughput The rate of throughput transmitted in Kbps.

tcp-conn-rate The TCP connection rate.

udp-conn-rate The UDP connection rate.

CPS The connection rate measured in seconds.

CurrConn Displays the number of current open connections on the virtual server.

TABLE 43 Virtual server information (Continued)

Field Description