(Supporting ADX v03.1.00) Owner manual

Brocade Virtual ADX Server Load Balancing Guide 383
53-1003247-01
Displaying port-binding information
B
Random-aged: total If the random threshold is configured, the total number of sessions that
were aged out at random because the number of free sessions dropped
below the random threshold, in addition to the number of sessions that
were aged out randomly in the last 60 seconds.
Refer to “Configuring fast session aging” on page 237 for more
information on the fast-age and random thresholds.
Statistics for Individual Real Servers
Server State The possible values for the server state. The state of each real server is
shown by the State field.
Real Server The name of the real server. This is the name you gave the server when
you configured it.
St The state of the real server. The state can be one of the states listed by
"Server State" at the top of the display.
NOTE: The value in this field is based on the results of Layer 3 health
checks. To display the server state based on Layer 4 or Layer 7
health checks, refer to the State field in the show server real
display. (Refer to “Displaying real server information and
statistics” on page 371.)
CurConn The number of client connections currently on the server. A connection
consists of two sessions, the client-to-server session and the
server-to-client session.
TotConn The number of client connections on the server since the Brocade
Virtual ADX was last booted or restarted. A connection consists of two
sessions, the client-to-server session and the server-to-client session.
Tot RevConn The total number of connections initiated by the server to a client.
CurrSess The number of sessions currently open on the Brocade Virtual ADX.
PeakConn The highest number of simultaneous connections the Brocade Virtual
ADX has managed since it was last booted or restarted.
TABLE 44 Field descriptions for the show server session command (Continued)
Field Description