(Supporting ADX v03.1.00) User Manual

278 Brocade Virtual ADX Switch and Router Guide
53-1003246-01
Displaying BGP4 information
8
Device 1 and 2
The show ip route output for device 1 and device 2 shows “drop” under the Port column for the
network prefixes you configured with null0 routing
.
Displaying BGP4 information
You can display the following configuration information and statistics for BGP4 protocol:
• Summary BGP4 configuration information for the device
• Active BGP4 configuration information (the BGP4 information in the running configuration)
• Neighbor information
• Information about the paths from which BGP4 selects routes
• Summary BGP4 route information
• The device’s BGP4 route table
• Route flap dampening statistics
• Active route maps (the route map configuration information in the running configuration)
• BGP4 Restart Neighbor Information
• AS4 support and asdot notation
Virtual ADX#show ip route
Total number of IP routes: 133
Start index: 1 B:BGP Be:EBGP Bi:IBGP D:Connected S:Static
O:OSPF IA:Inter area IR:Intra area E1:External type 1 E2:External type 2
(N): Don't advertise *:Candi-default
Type Codes - B:BGP D:Connected S:Static R:RIP O:OSPF; Cost - Dist/Metric
Destination Gateway Port Cost Type
1 10.0.1.24/32 DIRECT loopback 1 0/0 D
2 10.0.1.0/24 DIRECT eth 2/7 0/0 D
3 10.0.1.0/24 DIRECT eth 2/1 0/0 D
.
13 10.0.0.6/31 10.0.1.3 eth 2/2 20/1 B
14 10.0.0.16/30 10.0.1.3 eth 2/2 20/1 B
15 10.0.0.40/29 DIRECT drop 200/0 B
. .. . . . .
42 10.0.0.192/27 DIRECT drop 200/0 B
43 10.0.1.128/26 10.0.1.3 eth 2/7 20/1 B
. .. . . . .
69 10.0.7.0/24 10.0.1.3 eth 2/10 20/1 B
70 10.0.14.0/23 DIRECT drop 200/0 B
. .. . . . .
. .. . . . .
131 10.144.0.0/12 10.0.1.3 eth 3/4 20/1 B
132 192.168.0.1/32 DIRECT drop 1/1 S
Virtual ADX#