Programmer's Guide (Supporting ADX v03.1.00) Manual

112 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
SnmpCommunityFilter
This structure is a filter which consist of a simple SNMP community filter and can also add other
complex types later.
SnmpCommunitySimpleFilter
This structure is a high-level description of filter for SNMP community string.
SnmpGroupConfig
This structure is a high-level description of SNMP group configuration.
TABLE 275 Attributes
Parameters Type Presence Rules Description
simpleFilter SnmpCommunitySimpleFilter Optional Specifies the SNMP Community filter
data.
TABLE 276 Attributes
Parameters Type Presence Rules Description
field snmpCommunityFilterFieldEnum Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when
“operator” value is
“RANGE”.
Value of the field for
filtering.
startValue string Optional This parameter is
mandatory and
considered only
when “operator”
value is “RANGE”.
Start value in a range.
endValue string Optional This parameter is
mandatory and
considered only
when “operator”
value is “RANGE”.
End value in a range.
TABLE 277 Attributes
Parameters Type Presence Rules Description
name string Mandatory Maximum 32
characters.
Name of the group.
securityModel snmpGroupSecurityLevelEnum Mandatory SNMP security model
version.
securityLevel snmpGroupSecurityLevelEnum Optional This parameter is
applicable only
when
“securityModel” is
specified as “V3”.
SNMPv3 authentication
type.
accessControl
Config
SnmpAccessControlConfig Optional Only standard ACL
1-99 is allowed.
SNMP view configuration
information.