Programmer's Guide (Supporting ADX v03.1.00) Manual

116 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
SnmpServerGlobalConfiguration
This structure is a high-level description of SNMP server configuration.
SnmpStats
This structure is a high-level description of SNMP sent and received statistics.
SnmpTrapFilter
This structure is a filter which consist of simple and can also add other complex types later.
TABLE 284 Attitudes
Parameters Type Presence Rules Description
contactInfo string Optional Maximum of
64 characters.
Identification of the contact person
for this managed node.
locationInfo string Optional Maximum of
128
characters.
The physical location of this node,
up to 128 alphanumeric
characters.
engineIDInfo Snmpv3EngineIDInfo Optional Applicable only
for SNMPv3.
Identifies the local agent ID along
with associated information.
trapSource InterfaceID Optional Supported only
in router mode.
Specifies an interface for the
source address of all traps.
enablePasswordCheck twoWayToggleEnum Optional Controls password check on file
operation of MIB objects.
enableRadiusConfig twoWayToggleEnum Optional Specifies whether RADIUS
configuration can be performed
through SNMP.
enableTacacsConfig twoWayToggleEnum Optional Specifies whether TACACS
configuration can be performed
through SNMP.
vlan unsignedInt Optional Allowed value
range is 1 to
4095
Specifies the VLAN ID.
TABLE 285 Attributes
Parameters Type Presence Rules Description
totalReceived unsignedInt Mandatory Number of SNMP packets received
totalSent unsignedInt Mandatory Number of SNMP packets sent.
receivedStats SnmpReceivedStats Mandatory Total received packets statistics.
sentStats SnmpSentStats Mandatory Total sent packets statistics.
TABLE 286 Attributes
Parameters Type Presence Rules Description
simpleFilter SnmpTrapSimpleFilter Optional Simple filter