Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 117
53-1003248-01
Data structures
3
SnmpTrapReceiverConfig
This structure is a high-level description of SNMP engine id along with associated informations.
SnmpTrapSimpleFilter
This structure is a high-level description of filter for SNMP trap receiver filter information.
TABLE 287 Attributes
Parameters Type Presence Rules Description
hostIPAddress string Mandatory Specifies the IPv4/IPv6
host address.
version snmpSecurityModelEnum Optional If this parameter is
empty, then version
“V1” will be used.
Specifies the SNMP version
or security model.
userAuthSecurity Snmpv3UserAuthSecurity Optional This parameter is
mandatory when
snmpVersion is V3.
Specifies the SNMPv3
username and security
level.
portNumber unsignedInt Optional If this parameter is
specified, then
either
“userAuthSecurity”
or
“communityString”
parameter must be
specified. If this
parameter is empty,
then 162 will be
used as default port
value. The range is
from 1-65534.
Specifies the trap
destination UDP port
number. The default port
number is 162.
communityString string Optional This parameter is
considered only
when snmpVersion
is V1 or V2C. If this
parameter is
specified, then
“portNumber” must
be specified.
Specifies the SNMP
community string.
isEncrypted twoWayToggleBoolEnum Optional Specifies whether the
community string is
encrypted or not.
TABLE 288 Attributes
Parameters Type Presence Rules Description
field snmpTrapFilterFieldEnum Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when “operator”
value is “RANGE”.
Value of the field for
filtering.