Programmer's Guide (Supporting ADX v03.1.00) Manual

118 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
SnmpTrapStatus
This structure is a high-level description of SNMP traps status information.
Snmpv3EngineIDInfo
This structure is a high-level description of SNMP engine ID along with associated informations.
startValue string Optional This parameter is
mandatory and
considered only when
“operator” value is
“RANGE”.
Start value in a
range.
endValue string Optional This parameter is
mandatory and
considered only when
“operator” value is
“RANGE”.
End value in a range.
TABLE 289 Attributes
Parameters Type Presence Rules Description
trap snmpTrapsEnum Mandatory SNMP trap.
status twoWayToggleEnum Mandatory Specifies whether ENABLED or DISABLED.
TABLE 290 Attributes
Parameters Type Presence Rules Description
engineID string Mandatory Engine ID
cannot be
more than
64 hex
characters.
Specifies a local or remote SNMPv3 engine ID.
The engine ID identifies the source or destination
of the packet.
engineBoots unsignedInt Mandatory
Read Only
This
parameter is
ignored
during Set
and Update
operations.
Represents the number of times that the SNMP
engine reinitialized itself with the same engine ID.
engineTime unsignedInt Mandatory
Read Only
This
parameter is
ignored
during Set
and Update
operations.
The engine time represents the current time with
the SNMP agent.
TABLE 288 Attributes
Parameters Type Presence Rules Description