Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 123
53-1003248-01
Data structures
3
SntpAssociationFilter
This structure is a high-level description of filter for SNTP association.
SntpAssociationSimpleFilter
This structure is a high-level description of filter for SNTP association.
SntpStatus
This structure is the high-level description of SNTP configuration status.
pollingInterval unsignedInt Optional Specifies the Polling interval in seconds.
roundTripDelay string Optional Specifies the Round trip delay in
milliseconds.
dispersion string Optional Specifies the Dispersion in seconds.
TABLE 301 Attributes
Parameters Type Presence Rules Description
simpleFilter SntpAssociationSimpleFilter Optional Simple filter
TABLE 302 Attributes
Parameters Type Presence Rules Description
field sntpAssociationFilterFieldEnum Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when
“operator” value is
“RANGE”.
Value of the field for
filtering.
startValue string Optional This parameter is
mandatory and
considered only when
“operator” value is
“RANGE”.
Start value in a range.
endValue string Optional This parameter is
mandatory and
considered only when
“operator” value is
“RANGE”.
End value in a range.
TABLE 303 Attributes
Name Type Required Rules Description
sntpClockStatus sntpClockStatusEnum Optional Specifies whether peer is statically
configured or synchronized.
stratum unsignedInt Optional Specifies the NTP stratum level of the peer.
referenceClock string Optional Specifies the IP address of the peer’s
reference clock.
TABLE 300 Attributes
Name Type Required Rules Description