Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 127
53-1003248-01
Data structures
3
portNumber unsignedInt Optional This
parameter’s
valid value
ranges between
1 and 65535.
Default port 22.
Specifies the SSH port
number. The default
SSH port number is 22.
enableScp twoWayToggleEnum Optional Specifies whether the
secured-copy (SCP)
feature is enabled or
disabled.
ipv4AccessGroup AclID Optional If specified,
either the
accessList
number or
name must be
present, but not
both.
Specifies the IPv4
access list.
ipv6AccessGroup AclID Optional If specified,
either the
accessList
number or
name must be
present, but not
both.
Specifies the IPv6
access list name.
sourceInterface InterfaceID Optional Supported only
in router mode.
Specifies the source
interface.
encryptionTypesSupport
ed
string[ ] Optional
(READ-ON
LY)
This parameter
is used only
during Get
operation.
Specifies the
encryption types
supported.
authenticationMethods string[ ] Optional
(READ-ON
LY)
This parameter
is used only
during Get
operation.
Specifies the
authentication
methods supported.
ipv4Clients string[ ] Optional
(READ-ON
LY)
This parameter
is used only
during Get
operation
Specifies the IPv4 SSH
clients.
ipv6Clients string[ ] Optional
(READ-ON
LY)
This parameter
is used only
during Get
operation
Specifies the IPv6 SSH
clients.
TABLE 308 Attributes
Parameters Type Presence Rules Description