Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 135
53-1003248-01
Data structures
3
TemplateOperationResult
This structure is a used to return a result message from a Config Template operation. They will be
implemented in an array so that more than one message can be returned at one time.
suppressRejectMessage twoWayToggleEnum Optional Flag to indicate whether
connection reject message is
to be suppressed.
enableAuthentication boolean Optional Flag to indicate whether the
telnet authentication is
enabled or disabled.
password string Optional Clear text
password, up
to 48
alphanumeric
characters is
allowed.
Specifies the telnet
authentication password.
encryptPassword twoWayToggleBoolEnum Optional Specifies whether the
password encryption is
enabled or disabled.
sourceInterface InterfaceID Optional Supported
only in router
mode.
Specifies the source
interface.
vlan unsignedInt Optional Allowed value
range is 1 to
4095
Specifies the VLAN ID.
ipv4AccessGroup AclID Optional If specified,
either the
accessList
number or
name must be
present, but
not both.
Specifies the IPv4 access
list.
ipv6AccessGroup AclID Optional If specified,
either the
accessList
number or
name must be
present, but
not both.
Specifies the IPv6 access list
name.
TABLE 326 TemplateOperationResult attributes
Name Type Presence Rules Description
type templateFaultTypeEnum Mandatory Possible values are
"ERROR",
"WARNING",
"MESSAGE"
TABLE 325 Attributes
Parameters Type Presence Rules Description