Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 143

53-1003248-01

Enumerations

authorizationConfigParametersEnum

This structure is a high-level description of Authorization configuration parameters enumerated list.

arpTypeEnum

This structure is a high-level description of ARP type enumerated list.

bannerMessageTypeEnum

This structure is a high-level description of Banner message enumerated list.

bpStateEnum

These are the enumerations for BP states.

TABLE 346 Attributes

Parameters Description

EXEC_MODE_AUTHORIZATION_METHOD Exec mode authorization method

EXEC_COMMANDS_PRIV_AUTHORIZATION Exec commands priv authorization

TABLE 347 Attributes

Parameters Description

DYNAMIC The switch learned the entry from an incoming packet.

STATIC The switch loaded the entry from the static ARP table when the device for the entry was

connected to the switch.

PENDING The ARP entry will be in Pend (pending) status until traffic with the matching IP-to-MAC

is received on a port.

INVALID An invalid ARP entry.

OTHER ARP state is not pending, static, dynamic, or invalid.

TABLE 348 Attributes

Parameters Description

MESSAGE_OF THE DAY Set Message-of-the-day banner (default)

CONNECTION_MESSAGE Set incoming terminal line banner.

EXEC_MESSAGE Set EXEC process creation banner.

TABLE 349 Attributes

Parameters Description

BOOT_IMAGE_STATE Boot image state

POWERED Powered

BOOT_DIAG_FAILED Boot diag failed

BOOT_DIAG_OK Boot diag OK

IMAGE_LOAD_FAILED_OR_SKIPPED Image load failed or skipped

BP_NOT_READY BP not ready