Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 151

53-1003248-01

Enumerations

haSlbStateEnum

These are the enumerations for and SLB state enumerated list.

haStatusEnum

These are the enumerations of the High Availability (HA) status enumerated list.

haVipSymStateEnum

These are the enumerations of the HA VIP state enumerated list.

ENABLE_VRRP Enables VRRP in the Brocade Virtual ADX switch.

ENABLE_VRRP_EXTENDED Enables VRRP extended in the Brocade Virtual ADX switch.

TABLE 369 Attributes

Parameters Description

SLB_SYNC_COMPLETE All the synchronization requests from the local Brocade Virtual ADX switch have

been sent to the peer Brocade Virtual ADX switch.

SLB_SYNC_REQ_MAP Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual

ADX switch for port map information.

SLB_SYNC_REQ_MAC Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual

ADX switch for MAC information.

SLB_SYNC_REQ_SERVERS Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual

ADX switch for Server mapping.

SLB_SYNC_REQ_L4 Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual

ADX switch for session synchronization (fail-over session sync).

TABLE 370 Attributes

Parameters Description

ACTIVE Indicates the active device in the HA pair.

STANDBY Indicates the standby device in the HA pair.

TABLE 371 Attributes

Parameters Description

DISABLED Disabled

ENABLED Enabled

ACTIVE_CAPABLE Active and capable

STANDBY Standby mode

SUSPECT Suspect

ACTIVE Active mode

TABLE 368 Attributes

Parameters Description