Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 155

53-1003248-01

Enumerations

radiusServerGlobalConfigParametersEnum

This structure is a high-level description of RADIUS server configuration parameters enumerated

list.

radiusServerRoleEnum

This structure is a high-level description of RADIUS server use enumerated list.

roleEnum

This type of data will be a role enumerated list.

TABLE 383 Attributes

Parameters Description

KEY Default access string (maximum 32 characters).

DEAD_TIME Server dead time in seconds.

RETRANSMIT_COUNT Number of retries before giving up (maximum 5 times).

TIMEOUT Server time out in seconds (maximum 15 seconds).

SOURCE_INTERFACE Specify interface for source address in RADIUS packets. Supported only in

router mode.

NAS_IDENTIFIER Default access string (maximum 64 characters).

VLAN Specifies the VLAN information.

TABLE 384 Attributes

Parameters Description

ACCOUNTING_ONLY Use server for accounting only.

AUTHENTICATION_ONLY Use server for authentication only.

DEFAULT Use server for any AAA operation.

TABLE 385 Attributes

Parameters Description

NO_CONFIG The user is configured without any role.

NONE The user is not allowed to do both GET and SET operations.

VIEWER The user is allowed only to do GET operations.

OPERATOR The user is allowed to do GET operations and port-based operations such as Enable, Disable, and

so on.

MANAGER The user is allowed to do both GET and SET operations.