Programmer's Guide (Supporting ADX v03.1.00) Manual

158 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
3
snmpServerGlobalConfigParametersEnum
This structure is a high-level description of SNMP server configuration parameters enumerated list.
snmpTrapFilterFieldEnum
This structure is a high-level description of SNMP trap filter field enumerated list.
snmpTrapsEnum
This structure is a high-level description of SNMP traps enumerated list.
TABLE 394 Attributes
Parameters Description
CONTACT_INFORMATION Identification of the contact person for this managed node.
LOCATION_INFORMATION The physical location of this node, up to 128 alphanumeric characters.
ENGINE_ID Specifies the SNMPv3 server Engine ID.
TRAP_SOURCE Specifies the source interface for traps. Supported only in router mode.
ENABLE_PASSWORD_CHECK Control password check on file operation of MIB objects.
RADIUS_CONFIG RADIUS configuration.
TACACS_CONFIG TACACS configuration.
VLAN VLAN information.
TABLE 395 Attributes
Parameters Description
HOST_IP_ADDRESS Specifies the IPv4/IPv6 host address.
VERSION Specifies the SNMP version or security model.
USER_SECURITY_LEVEL Specifies the SNMPv3 security level.
USER_NAME Specifies the SNMPv3 user name.
PORT_NUMBER Specifies the trap destination UDP port number.
TABLE 396 Attributes
Parameters Description
AUTHENTICATION Authentication
COLD_START Cold start
FAN_FAILURE Fan failure
L4_FIREWALL_ACTIVE L4 firewall active
L4_FIREWALL_PATH_DOWN L4 firewall path down
L4_FIREWALL_PATH_UP L4 firewall path up
L4_FIREWALL_STANDBY L4 firewall standby
L4_GSLB_HEALTH_CHECK_IP_DOWN L4 GSLB health check IP down
L4_GSLB_HEALTH_CHECK_IP_PORT_DOWN L4 GSLB health check IP port down
L4_GSLB_HEALTH_CHECK_IP_PORT_UP L4 GSLB health check IP port up