Programmer's Guide (Supporting ADX v03.1.00) Manual

162 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
3
sourceIPTypeEnum
This structure is a high-level description of source IP type enumerated list.
sshConnectionFilterFieldEnum
This structure is a high-level description of SSH connection filter field enumerated list.
sshServerGlobalConfigParametersEnum
This structure is a high-level description of SSH server configuration parameters enumerated list.
TABLE 405 Attributes
Parameters Description
SOURCE_IP Source IP address
SOURCE_NAT_IP Source NAT IP address
SOURCE_STANDBY_IP Source standby IP address
TABLE 406 Attributes
Parameters Description
CONNECTION_NUMBER Specifies the SSH connection number.
VERSION Specifies the SSH version information.
ENCRYPTION_METHOD Specifies the Encryption method used for this connection.
USER_NAME Specifies the Username information.
TABLE 407 Attributes
Parameters Description
SSH SSH server enable or disable.
AUTHENTICATION_RETRIES Number of authentication retries allowed.
IDLE_TIMEOUT SSH idle timeout in minutes, 0 never timeout.
LOGIN_TIMEOUT SSH login timeout in seconds.
IS_KEY_AUTHENTICATION Enable/Disable public key authentication.
KEY_SIZE SSH server RSA key size (default 768 bits).
PASSWORD_AUTHENTICATION Enable/Disable password authentication.
PERMIT_EMPTY_PASSWORD Permit empty password login.
PORT_NUMBER SSH port (default port 22).
SCP Enable or disable SCP.
SOURCE_INTERFACE Specify the source interface. Supported only in router mode.
IPV4_ACCESS_GROUP IPv4 Access control list.
IPV6_ACCESS_GROUP IPv6 Access control list.