Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 191
53-1003248-01
Methods
4
Parameters
Table 474 contains the parameters required for the method.
Return values
Table 475 contains the return values of the method.
Error messages
List of Error Messages
getAllVlanGroups
Description
Retrieves all of the VLAN group information associated with the device.
Parameters
Table 476 contains the parameters required by the method.
TABLE 474 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional When both
“startIndex” and
“numRetrieved” are
not present, then
only the possible
number of TCP MSS
information is
retrieved.
Start index for retreiving the TCP
MSS configured.
numRetrieved unsignedInt Optional When both
“startIndex” and
“numRetrieved” are
not present, then
only the possible
number of TCP MSS
information is
retrieved.
Number of the TCP MSS
information to be retrieved.
Maximum value allowed is 128.
TABLE 475 Return values
Name Type Description
genericInfo ResponseInformation Identifies the generic information about all of the TCP maximum
segment size of destination IP addresses.
mssList TcpMss[] The list of TCP maximum segment size configuration.
globalTcpMss GlobalTcpMss Global TCP MSS configuration.
TABLE 476 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional Identifies the starting index.
numRetrieved unsignedInt Optional Identifies the number of sessions to be retrieved. The
maximum value allowed is 10.
filterInfo VlanFilter Optional Specifies the filter criteria.