Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 247
53-1003248-01
Data structures
4
GlobalTcpMss
This structure is the high-level description of global TCP Mss IPv4/IPv6 confguration.
GlobalStpTimer
This structure is a high-level description of global STP timer.
changeCount unsignedInt Optional The number of times the topology has
changed since this device was reloaded.
bridgeAddress string Optional Spanning tree address of the device or VLAN.
TABLE 628 Attributes
Parameters Type Presence Rules Description
mssV4 unsignedInt Optional Valid value range is from 64
to 9216.
Make sure that the IP MTU of
the interfaces is always
greater than the MSS value.
This parameter is used to define
the Global TCP MSS IPv4 value for
all SYN-ACK packets generated by
a Virtual ADX.
mssV6 GlobalTcpMssV6 Optional This parameter is used to define
the global TCP MSS IPv6
configuration.
TABLE 629 Attributes
Name Type Presence Rules Description
helloTimer unsignedInt Optional The interval between Hello packets. This timer
applies only to the root bridge.
topologyChange unsignedInt Optional The amount of time during which the topology
change flag in Hello packets will be marked,
indicating a topology change. This timer applies only
to the root bridge.
topologyChangeNotify unsignedInt Optional The interval between Topology Change Notification
packets sent by a non-root bridge toward the root
bridge. This timer applies only to non-root bridges.
messageAge unsignedInt Optional The number of seconds this port has been waiting
for a hello message from the root bridge.
forwardDelay unsignedInt Optional The configured forward delay interval.
holdTime unsignedInt Optional The number of seconds that have elapsed since
transmission of the last configuration BPDU.
TABLE 627 Attributes (Continued)
Name Type Presence Rules Description