Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 253
53-1003248-01
Data structures
4
InterfaceBrief
This structure is the high-level description of interface brief summary information.
isStpEnabled boolean Optional Enables or disables
STP.
priorityLevel unsignedInt Optional The priority level.
flowControlState twoWayToggleEnum Optional The flow control
state.
mirrorState twoWayToggleEnum Optional The mirror state.
monitorState pvstMethodEnum Optional The monitor state.
mtu unsignedInt Optional The maximum
transmission unit.
ipv6Mtu unsignedInt Optional The IPv6 maximum
transmission unit.
ipv6State twoWayToggleEnum Optional The IPv6 state
enabled or
disabled.
ipv6GlobalUnicastIP string Optional The IPv6 global
unicast IP address.
ipv6GlobalUnicastSubnetMaskLength string Optional The IPv6 global
unicast subnet
mask length.
ipv6ConfiguredUnicastIP string Optional The IPv6 configured
unicast IP address.
ipv6ConfiguredUnicastSubnetMaskLe
ngth
string Optional The IPv6 configured
unicast subnet
mask length.
TABLE 636 Attributes
Name Type Presence Rules Description
Id InterfaceDetails Optional The interface Identifier.
interfaceName string Optional The interface name.
status portStatusEnum Optional The port status.
stpState portStpStateEnum Optional The port STP state.
autoNegotiateState twoWayToggleEnum Optional Auto-negotiate speed and duplex.
speed portSpeedEnum Optional The speed of the port.
duplex portDuplexTypeEnum Optional The duplex of the port.
gigabitMode portSpeedGigabitModeEnum Optional The gigabit mode.
trunk unsignedInt Optional The trunk number.
isTagged boolean Optional The tagged or untagged port.
TABLE 635 Attributes (Continued)
Name Type Presence Rules Description