Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 257
53-1003248-01
Data structures
4
InterfaceID
This structure is a high-level description of the IP interface identifier.
InterfaceInputErrorStatistics
This structure is the high-level description of the interface input or received error statistics
summary information.
TABLE 639 Attributes
Name Type Presence Rules Description
portString string Optional When this parameter is
present as part of the
request message, the
parameters “portString”,
“slot”, and “port” must not
be present.
The interface port string. For
example, Ethernet “1” or
“1/1”; Loopback “lb1” or
“lb2”.Group Virtual
"group-ve1" or "group-ve2";
Virtual “ve1” or “ve2” and
Management “mgmt1” only.
interfaceType interfaceTypeEnum Mandatory This parameter is
mandatory and considered
only when “portString” is
absent.
“ETHERNET” and
“MANAGEMENT” interface
types are supported in
switch mode only.
The type of interface.
slot unsignedInt Optional When this parameter part
of the request message,
the parameter “portString”
must not be present.
This parameter value is
ignored for an ADX 1U
configuration.
The slot number of the
interface.
port unsignedInt Optional When this parameter is
part of the request
message, the parameter
“portString” must not be
present.
This parameter is
mandatory when “slot” is
present with a value.
The port number of the
interface.
portType portTaggedModeEnum Optional The port type
TABLE 640 Attributes
Name Type Presence Rules Description
totalErrorCount unsignedInt Optional The total count of errors.
crcErrorCount unsignedInt Optional The CRC error count.
frameErrorCount unsignedInt Optional The frame error count.
ignoredPacketCount unsignedInt Optional The count of ignored packets.
runtPacketCount unsignedInt Optional The count of runts or small size packets.