Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 265
53-1003248-01
Data structures
4
IPRouteInfo
This structure is a high-level description of IP route information.
IPRouteSummary
This structure is a high-level description of an IP route summary.
IPRouteSummarySimpleFilter
This structure is a high-level description of a IP Route summary simple filter.
TABLE 656 Attributes
Name Type Presence Rules Description
destination string Optional The destination network of the route.
networkMask string Optional The network mask of the destination address.
gateway string Optional The next-hop router.
port string Optional The port through which this router sends packets
to reach the route's destination.
cost unsignedInt Optional The cost of the route.
routerType string Optional The route type.
TABLE 657 Attributes
Members Type Presence Rules Description
IPAddress string Mandatory IPv4 or IPv6
maskAddressOrM
askBit
string Mandatory NextHop/Gateway IPv4 or IPv6
nextHopAddress string
cost string Optional Cost
protocolType ipRouteTypeEnum Mandatory The protocol type
TABLE 658 Attributes
Parameters Type Presence Rules Description
field IPRouteSummaryFilter Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when the “operator”
value is “RANGE”.
The value of the field for
filtering.
startValue string Optional This parameter is mandatory
and considered only when
“operator” value is “RANGE”.
Start value in a range.
endValue string Optional This parameter is mandatory
and considered only when
“operator” value is “RANGE”.
End value in a range.