Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 307
53-1003248-01
Data structures
4
SwitchIPConfig
This structure is the high-level description of TCP maximum segment size configuration.
TcpMss
This structure is the high-level description of TCP maximum segment size configuration.
TcpStatistics
This is a high-level description of Transmission Control Protocol (TCP) statistics.
TABLE 748 Attributes
Name Type Presence Rules Description
enableIpv6AutoConfig boolean
ipv6ReachableTime unsignedInt
TABLE 749 Attributes
Name Type Presence Rules Description
Mss unsignedInt Mandatory The valid value range is from 64 to
9176 bytes.
The TCP maximum segment size.
destinationIP string Optional IPv4 or IPv6 address. The destination IP address.
range unsignedInt Optional The valid value range is from 1 to
64.
This parameter is valid only as
part of the request message.
The value will be ignored when
"destinationIP" is not present.
The range of IP addresses.
TABLE 750 Attributes
Name Type Presence Rules Description
activeOpens unsignedLong Optional The number of TCP connections opened by this
device by sending a TCP SYN to another
device.
passiveOpens unsignedLong Optional The number of TCP connections opened by this
device in response to connection requests
(TCP SYNs) received from other devices.
failedAttempts unsignedLong Optional This information is used by Brocade customer
support.
activeResets unsignedLong Optional The number of TCP connections this device
reset by sending a TCP RESET message to the
device at the other end of the connection.
passiveResets unsignedLong Optional The number of TCP connections this device
reset because the device at the other end of
the connection sent a TCP RESET message.
inputErrors unsignedLong Optional This information is used by Brocade customer
support.
inSegments unsignedLong Optional The number of TCP segments received by the
device.