Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 327
53-1003248-01
Enumerations
4
filterOperatorEnum
This type of data describes the enumerations for a filter operator.
hostTypeEnum
This type of data describes the enumerations for a host type.
interfaceTypeEnum
This type of data describes the enumerations for types of IP interfaces.
interfaceStaticticsSummaryFilterFieldEnum
This type of data identifies the enumerations for field names in the interface statistics summary.
TABLE 790 Attributes
Parameters Description
CONTAINS Applicable only on string type fields.
LESS_THAN Applicable only on Integer type fields.
GREATER_THAN Applicable only on integer type fields.
EQUAL_TO Applicable only on Integer or boolean or enumeration type fields.
NOT_EQUAL
MASK Applicable only on IP or subnet mask or MAC address fields.
RANGE Applicable only on integer or date type fields.
TABLE 791 Attributes
Parameters Description
HOSTTYPE The host.
ROUTERTYPE The router device.
FIXEDHOST The host type remains fixed.
TABLE 792 Attributes
Parameters Description
ETHERNET Valid only in Router mode.
GROUP_VIRTUAL Valid only in Router mode.
VIRTUAL Valid only in Router mode.
LOOPBACK Valid only in Router mode.
MANAGEMENT Valid only in Router mode.
TABLE 793 Attributes
Parameters Description
PORT_STRING Identifier for the “interfaceStatisticsSummary->id->portString” parameter.
INTERFACE_TYPE Identifier for the “interfaceStatisticsSummary->id->interfaceType” parameter.
SLOT Identifier for the “interfaceStatisticsSummary->id->slot” parameter.