Programmer's Guide (Supporting ADX v03.1.00) Manual

486 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
5
PortPolicySummarySimpleFilter
This structure is the high-level description of port policy summary simple filter.
PortProfile
This structure is the high-level description of any port profile.
TABLE 391 Attributes
Name Type Presence Rules Description
field portPolicySummaryFilterFieldEnum Mandatory Name of the filter
field.
operator filterOperatorEnum Mandatory Type of the filter
operator.
value string Optional Ignored when "operator"
value is "RANGE".
Value of the field for
filtering.
startValue string Optional This parameter is
mandatory and
considered only when
"operator" value is
"RANGE".
Start value in a range.
startValue string Optional This parameter is
mandatory and
considered only when
"operator" value is
"RANGE".
End value in a range.
TABLE 392 Attributes
Name Type Presence Rules Description
protocol string Optional The communications
protocol used by this port
status boolean Optional The status of this port,
indicating whether the port is
operational.
portType l4PortTypeEnum Optional TCP or
UDP
Identifies the port as TCP or
UDP.
tcpOrUdpAge unsignedInt Optional 2-60 The number of minutes a
session can remain active
before the Virtual times it
out.
tcpAgeMultiplier unsignedInt No 1-20 Multiplies the minutes of
tcpOrUdpAge by up to 20
periodicHealthCheck boolean Optional Specifies whether to run
health checks
periodicHealthCheckInterval unsignedInt Optional 1—20 The number of minutes
between health checks
periodicHealthCheckRetries unsignedInt Optional 1—5 The maximum number of
times to retry an
unsuccessful health check.