Programmer's Guide (Supporting ADX v03.1.00) Manual

42 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Methods
3
Parameters
Table 90 contains the parameters required for the method.
Return values
Table 91 contains the return values of the method.
Error messages
List of Error Messages.
getAllTacacsServersConfiguration
Description
This method retrieves all the configured TACACS servers.
Parameters
Table 92 contains the parameters required for the method.
TABLE 90 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional Sets the start index for retrieving the SNMP
groups. When both startIndex and
numRetrieved parameters are not present, then
all the possible SNMP groups will be returned.
numRetrieved unsignedInt Optional Specifies the number of SNMP groups to be
retrieved. The maximum value allowed is 64.
When both startIndex and numRetrieved
parameters are not present, then all possible
SNMP groups will be returned.
Filter SnmpGroupFilter Optional Filter criteria.
TABLE 91 Return values
Name Type Description
genericInfo ResponseInformation Generic information. This provides the information - total entries
available and the time at which the values are retrieved.
groupList SnmpGroupConfig[ ] Retrieves all the SNMP groups configuration information.
TABLE 92 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional Sets the start
index for
retrieving the
configured
TACACS servers.
When both startIndex and numRetrieved
parameters are not present, then all the
possible configured TACACS servers will be
returned.
numRetrieved unsignedInt Optional Specifies the number of configured TACACS
servers to be retrieved. The maximum value
allowed is 8. When both startIndex and
numRetrieved parameters are not present,
then all possible configured TACACS servers
will be returned.
Filter TacacsServerFilter Optional Filter criteria.