Programmer's Guide (Supporting ADX v03.1.00) Manual

516 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
5
stickyAgeMultiplier unsignedInt Optional The multiplier value that is applied to
the global sticky age value for a
specific virtual server.
enableVipProtection boolean Optional A
system
reload
is
needed
after
setting
this
attribut
e.
Enables VIP protection, and denies the
traffic to a port that is not defined
under a VIP.
predictor predictorEnum Optional The load balancing predictor that the
Brocade Virtual ADX uses to balance
traffic among the real servers bound to
the virtual server. The predictor can be
one of the following:
•Dymamic weighted direct
•Dymamic weighted reverse
•Enhanced weighted
• Least connection
• Response time
• Round robin
•Weighted
• Weighted round robin
• Weighted round robin static
adminState boolean Optional The administrative state of the virtual
server, which can be one of the
following:
• Enable
• Disable
subnetMask string Optional Defines the subnet mask.
accessControlListID unsignedInt Optional The
default
is 0
Identifies the ID of the ACL whose rules
must be applied.
OID unsignedInt Optional OID
max unsignedInt Optional Maximum
enableACLNATOverride boolean Optional Identifies whether ACL NAT is to be
overridden or not.
enableFallBackToDefaultGateway boolean Optional Identifies whether the default gateways
is to be used if the next-hop is not
contactable.
hostRange unsignedInt Optional The
valid
range is
from 0
to
4096.
Specfies the range for the host.
TABLE 472 Attributes (Continued)
Name Type Presence Rules Description