Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 517
53-1003248-01
Data structures
5
VirtualServerConnStats
This structure is a a high-level description of any virtual server connection statistics.
nextHop string Optional IP address of the next hop.
tosMarking unsignedInt Optional Valid
betwee
n 1 and
63.
TOS setting for layer 3 DSR.
enableHealthCheckLayer3DSR boolean
trackingMode trackingModeE
num
Optional Determines if it is a port or a group of
ports.
trackPort L4Port Optional Track port
trackPortList L4Port[] Optional List of ports in a track group.
vipHealthInjectionSubnetLength unsignedInt Optional VIP RHI Route Mask Length.
haMode haModeEnum Optional The high availability mode configured
in for the virtual server.
symmetricMac string Indicates if the virtual server is in
Symmetric Mac mode.
symmetricActive boolean Optional Indicates if the virtual server is in
Symmetric Active mode.
symmetricDynamicPriority unsignedInt Optional Dynamic Priority value that differs from
the symmetric priority.
tcpMss unsignedInt Optional Valid
value
range is
from 64
to
9216.
This parameter is to set the MSS value
for all of the ports under a virtual
server on a Brocade Virtual ADX.
maxTCPConnRate unsignedLong Optional Max TCP connection rate
maxUDPConnRate unsignedLong Optional Max UDP connection rate
TABLE 473 Attributes
Name Type Presence Rules Description
virtualServer Server Optional The virtual server name and IP.
virtualServerStatusInfo VirtualServerStatus Optional The virtual server status
information.
predictor predictorEnum Optional The virtual server predictor
method.
accessControlListID unsignedInt Optional Valid range is
from 1 to 199.
The ID of the Access Control List.
symmetricPriority unsignedInt Optional Valid range is
from 0 to 255.
The Symmetric SLB priority
configured on the Brocade Virtual
ADX device.
TABLE 472 Attributes (Continued)
Name Type Presence Rules Description