Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 43
53-1003248-01
Methods
3
Return values
Table 93 contains the return values of the method.
Error messages
List of Error Messages
getAllSnmpTrapReceivers
Description
This method retrieves all the configured SNMP trap receivers.
Parameters
Table 94 contains the parameters required for the method.
Return values
Table 95 contains the return values of the method.
Error messages
List of Error Messages
TABLE 93 Return values
Name Type Description
genericInfo ResponseInformation This provides the total entries available and the time at which the
values are retrieved.
serverList TacacsServerConfiguration[ ] Retrieves all the configured TACACS servers.
TABLE 94 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional Sets the start index for retrieving the SNMP trap
receivers. When both startIndex and numRetrieved
parameters are not present, then all the possible SNMP
trap receivers will be returned.
numRetrieved unsignedInt Optional Specifies the number of SNMP trap receivers to be
retrieved. The maximum value allowed is 64. When both
startIndex and numRetrieved parameters are not
present, then all possible SNMP trap receivers will be
returned.
Filter SnmpTrapFilter Optional Filter criteria.
TABLE 95 Return values
Name Type Description
genericInfo ResponseInformation Generic information. This provides the information - total entries
available and the time at which the values are retrieved.
receiverList SnmpTrapReceiverConfig[ ] Retrieves all the SNMP trap receivers configuration information.