Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 545
53-1003248-01
Enumerations
5
realServerFilterFieldEnum
This structure is the high level description of a real server filter.
realServerGroupFilterFieldEnum
This structure is the high level description of a real server group filter.
ENABLE_SOURCE_NAT Enables source NAT.
ENABLE_DESTINATION_NAT Enables the destination NAT.
ENABLE_HW_FORWARD_PASSTHROUGH_TRAFFIC Enables the hardware forward of pass through traffic.
NO_REVERSE_NAT Disables reverse NAT.
SOURCE_NAT_ACL_ID The ACL ID for source NAT.
SOURCE_IP The source IP address.
MAX_CONNECTION The maximum number of connections.
ENABLE_EXCEED_MAX_DROP Drops the packet if the maximum connections are
surpassed.
MAX_TCPCONN_RATE The maximum rate for TCP connections.
MAX_UDPCONN_RATE The maximum rate for UDP connections.
BANDWIDTH_WEIGHT The bandwidth weight.
BYTE_RATE_THRESOLD The byte rate threshold.
IS_ASYMMETRIC Enables the asymmetric feature.
ENABLE_STATIC_NAT_ACL Enables static NAT on ACL.
ENABLE_USE_LEARNED_MAC_ADDR Enable to use learned MAC address through ICMP.
WEIGHT The weight for a predictor.
TABLE 533
Parameters Description
SERVER_NAME The name of the real server.
SERVER_IP The IP address of the real server.
ADMIN_STATUS The administration status of the real server.
RUNTIME_STATE The runtime state of the real server.
CURRENT_CONNECTION The current connection details of the real server.
TOTAL_CONNECTION The total connection details of the real server.
IN_SERVER_GROUP
TABLE 534
Parameters Description
GROUP_NAME Real server group name
TABLE 532
Parameters Description