Programmer's Guide (Supporting ADX v03.1.00) Manual

546 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
5
realServerPortAttributesEnum
This structure is the high level description of a real server port attributes.
realServerPortConnStatsFilterFieldEnum
This type of data describes the real server port connection statistics filter.
TABLE 535
Parameters Description
MAX_TCP_CONN_RATE Maximum TCP connection rate.
MAX_UDP_CONN_RATE Maximum UDP connection rate.
MAX_CONNECTIONS Maximum connection rate.
TCP_ONLY Allows only TCP traffic to the real server port.
UDP_ONLY Allows only UDP traffic to the real server port.
SERVER_ID Server ID
SLOW_START_ID Configured slow start ID.
GROUP_ID Group ID
IS_BACKUP The backup server name.
ENABLE_CLEAR_SESSION_ON_PORT_UP Clears server sessions if there are existing connections or the
port is still in AWU or AWM state.
ENABLE_PERIODIC_HEALTH_CHECK Enables periodic health checks.
ENABLE_L4_CHECKONLY Enables the Layer 4 check only.
L4_BRINGUP_CHECK_INTERVAL
L7_BRINGUP_CHECK_INTERVAL
PORT_POLICY Port policy name.
CUSTOM_HEALTHCHECK Health check that is customized for a given application server.
ENABLE_HOLDDOWN Enables port hold down for all ports on all real servers.
TABLE 536
Parameters Description
SERVER_NAME Server name
SERVER_IP Server IP
PORT_NAME_OR_NUMBER Port name or number
ASSOCIATED_PORT_NAME_OR_NUMBER Associated port name or number
SERVER_RUNTIME_STATUS Server runtime status
CURRENT_CONN Current connection
PEAK_CONN Peak connection
TOTAL_CONN Total connection
RX_PKTS Rx packets
RX_BYTES Rx bytes
TX_PKTS Tx packets