Programmer's Guide (Supporting ADX v03.1.00) Manual

Brocade Virtual ADX XML API Programmer’s Guide 555

53-1003248-01

Enumerations

virtualServerPortFilterFieldEnum

This type of data describes the enumerations of the virtual server port filter.

ENABLE_WINDOWS_TERMINAL_SERVERPORT Enables the windows terminal server port.

ENABLE_STICKY_ACL Enables sticky ACL.

ENABLE_DROP_ACK_WITH_NODATA Drops acknowledgement with no data.

ENABLE_SSL_SESSIONID_SWITCHING Enables SSL session ID switching on the virtual server port.

ENABLE_SWL4_PBSLB Enables policy-based SLB on a virtual server port.

ENABLE_WAITFOR_ENDHTTP The device buffers all request packets until all the necessary

information is received ensuring that the whole HTTP header is

saved.

MINIMUM_HEALTHY_SERVERS The minimum number of real server ports that are bound to the

virtual server port and are healthy and in the UP state.

ENABLE_NOSTICKY_EXCEED_MAX Enables no-sticky-exceed-max on the virtual server port.

TCP_ONLY Allows only TCP traffic to the virtual server port.

ENABLE_UDP_FASTDEL_CNT Enables UDP fast aging.

UDP_ONLY Allows only UDP traffic to the virtual server port.

ENABLE_TRACK_PORTGROUP Enables track port group.

CSW_POLICY Name of the CSW policy

PORT_POLICYNAME Name of the port policy

ENABLE_BACKUPSERVER_USE Identifies whether to use backup server while server associated

with this port goes down.

ENABLE_BACKUPSTAY_ACTIVE Identifies whether this port should keep using the backup

server even if primary server is active.

TCP_MSS TCP MSS

TABLE 557

Parameters Description

SERVER_NAME Server name.

SERVER_IP Server IP address.

PORT_NAME_OR_NUMBER Port name or number.

CURRENT_CONNECTIONS Current connections.

TABLE 556

Parameters Description